Now that you've learned how to connect Corners and Planes, in this section were going to learn about how to put all the pieces together to form a Container.


We like to first assemble all of our walls, and then connect it to the bottom of the Container. In order to assemble the walls, you'll need to first assemble the first vertical corner. You'll want to leave the Corner in the Corner Base Plate, and then, you'll want to get your second vertical corner and place it in another Corner Base Plate. This makes it so that you can easily tap it into place, the Corner Base Plates help to distribute the force of the Mallet so that you can always get the perfect strike with the mallet! Next you'll need to flip it over, and and repeat the process until all 4 walls of the container are put together.

After you've gotten all 4 walls connected, it's time to set up the bottom of the container. We like to attach 4 corners to the bottom piece on each side, this way, you can just take your newly setup wall structure, and tap it into place. We like to stick the wall structure into the Base Plate so that it doesn't wobble around, and then line the bottom piece up with the attached 4 corners, and tap it in with the mallet.

After you've done all of this, you can finally get your end pieces and tap those into the top of the container to give it a nice flushed edge and polished look. And that's it! You've now got a container ready to use!

Pro tip, pay special attention to which Corner types you're using, if you're using an L bracket, or a C bracket to make sure that all of the holes are filled in.

Image: Wall structure attaching to bottom piece structure
Video: Full walkthrough of a container assembly